Encapsulation and Potting

2-part RTV silicone (room temperature curing) condensation cure and 2K PU potting materials for electronic protection:

• Elastomers with high mechanical performance
• UL 94 V-0 rated
• Thermally conductive
• 2K materials for potting electronics and LEDs

Potting and encapsulating materials for your sensitive electronics:

• 2-part potting gel for protection of sensitive electronic components
• 2-part optical clear with low volatiles
• 2-part optical clear with low viscosity

https://www.syneo-solutions.com/en/dispensing-systems/dispensing-volumetric-pumps/2c-volumetric-pumps/

Our products

TDS	2K Potting	Color	Viscosity mPa.s	Mixing	Shore A	Skin time	UL 94	Dielectric	Thermal	Temperature	Shelf Life
						Min		strength	conductivity		months
								(kV/mm)	(W/m.K)
TDS	ESA7263 AB	Grey	4000	1:1	30	30	V-0	11	1,1	-60 – 150	6
TDS	ESA7252 AB	Black	3500	1:1	52	90	V-0	18	0,48	-60 – 270	20
TDS	ESA7250 AB	Clear	4000	10:1	52	240	HB	20	0,16	-70 – 180	24
TDS	QSIL553LV	Grey	4000	1:1	45	100	V-0	19	0,65	-55 – 240	24
TDS	QSIL 216 AB	Clear	3700	10:1	40	360	HB	19	0,18	-55 – 204	24
TDS	QSIL 12 AB	Clear/Milky	1300	20:1	18	60-180	HB	15	0,18	-55 – 204	18
TDS	QSIL 216 AB	Clear	3700	10:1	40	60-180	HB	19	0,18	-55 – 204	24
TDS	QSIL 218 AB	Clear	3000	10:1	55	6 Hours	HB	500 V/mil	0,18	-55 – 204	24
TDS	QSIL 222 AB	Clear	1800	10:1	40	24 Hours	HB	500 V/mil	0,18	-55 – 204	24
TDS	QSIL 229 AB	Clear	2900	1:1	65	–	HB	500 V/mil	0,18	-55 – 204	24
TDS	SE 2014 AB	Green	10000	1:1	67	6 Hours	HB	32,1	0,14	-55 – 200	12
TDS	Novasil S651	Black	2000	10:1	46-51	15	V-0	19	0,32	-40 – 150	9
TDS	Novasil S822	Clear	8000	10:1	19	15	HB	15,8	0,2	-40 – 150	9
TDS	Novasil S824	Black	2000	10:1	20	30	HB	18	0,2	-40 – 150	9
TDS	Novasil AS 620	Red	2900	1:1	49	360	V-0	23	0,75	-45 – 150	12
TDS	Novasil AS 622	Grey	7500	1:1	57	45	V-0	23	1,32	-45 – 150	12
TDS	Novasil AS 624	Grey	13000	1:1	44	60	V-0	23	1,65	-45 – 150	12
TDS	NP1490 PU	Clear	500	1:1	75	15	HB	15	0,2	-40 – 130	12
TDS	NP1084 PU	Beige	3000	7-1	95	20-25	V-0	15	0,9	-40 – 130	12

TDS	2K Potting	Color	Viscosity mPa.s	Mixing	Skin time	Penetration	Adhesion	Dielectric	Thermal	Temperature	Shelf Life
	GEL/soft				Min	mm/10		strength	conductivity		months
								(kV/mm)	(W/m.K)
TDS	ESA 6025A&B GEL	Slight Blue	1300	1:1	70	270	Tacky	23	0,15	-45 – 150	12
TDS	ESA 6110 A&B GEL	Clear	1200	1:1	50	250	Tacky	23	0,15	-45 – 150	12
TDS	Egel 3000 AB	Clear	630	1:1	45	19.5/2.5	Tacky	>18.5	0,18	-55 – 180	18
TDS	TufGel 330	Clear	800	1:1	70	Shore 00 30-55	Tough Gel		0,18	-55 – 204	24
TDS	Novasil AS 830	Crystal Clear	350	1:1	90	73		21	0,2	-55 – 200	12
TDS	Novasil AS 832	Crystal Clear	920	1:1	60	60		21	0,2	-55 – 200	12
TDS	Novasil AS 835	Crystal Clear	3800	1:1	60	76		21	0,2	-55 – 200	12
TDS	Novasil AS 840	Crystal Clear	200	1:1	90	15	Tough Gel	21	0,2	-45 – 180	12